Description
GW50C fully automatic rebar bender
2. The transmission case is made of HT250.
3. All gears are made of QT 500-7 (nodular cast iron), working discs and square bars, and the gear shaft is made of 45 carbon steel forged.
4. The bending mold is made of Cr12 and heat treatment process.
5. The electrical appliances used are manufactured by the international brand Schneider.
After years of research and development and repeated trials by our company, this is a durable and reliable steel processing product.
Features of this machine:
1. Reasonable design, so that the power of this machine is greater than similar products. It can directly bend Q235 bars with a diameter of 50 mm.2. The transmission case is made of HT250.
3. All gears are made of QT 500-7 (nodular cast iron), working discs and square bars, and the gear shaft is made of 45 carbon steel forged.
4. The bending mold is made of Cr12 and heat treatment process.
5. The electrical appliances used are manufactured by the international brand Schneider.
6. Active and stable operation, low noise, control within 70-80 decibels, simple and flexible operation, and equipped with a foot switch,
the machine can rotate and reset when the worker gently steps with his foot, which greatly improves the work efficiency.
Technical parameters of rebar bender
Model | GW42 | GW50C | GW50E |
Bending range(mm) | 6-40 | 6-50 | 6-50 |
Bending speed(times/min) | 5-10 | 10 | 10 |
Motor Power(KW) | 3 | 4 | 4 |
Packing size(mm) | 960*860*1060 | 1050*900*1070 | 1050*900*1070 |
Diameter of working disc(mm) | 380 | 410 | 410 |
Net Weight(kg) | 350 | 375 | 395 |